Technical & Electrical Specifications

Nominal Voltage

25.6 V DC

Battery Capacity

200 Ah

Max Continuous Discharge

200 A

Initial State of Charge

100

Terminal Pinouts & Hardware Connections

Verify physical terminal sizes, stud threads (M6, M8, M10), and circuit polarity before crimping lugs or running wiring.

Hardware terminal connection details and stud sizes for Smart LiFePO4 25.6V 200Ah
Terminal Label	Polarity / Type	Nominal Voltage	Physical Hardware	Location
BAT+ pos	+ DC Positive	25.6V	Standard Terminal	Left Panel
BAT- neg	- DC Negative	25.6V	Standard Terminal	Right Panel
BMS bms_cable	Data	25.6V	Standard Terminal	Top Panel

Installation Safety Standard: Always size circuit protection (ANL, MIDI, or MEGA fuses) to protect the cable run attached to these terminals against dead shorts and thermal overload, in compliance with AS/NZS 3001, AS/NZS 3004, and ABYC E-11 standards.

Official Product Manual & Wiring Guidelines

Manufacturer technical instructions, safety precautions, and troubleshooting procedures.

Download PDF Manual

1. Safety Instructions

External BMS Required: Victron Smart batteries require an external BMS (smallBMS, VE.Bus BMS, or Lynx Smart BMS) to protect against under-voltage and over-temperature.

Up to 2 in series (for 48V systems) and up to 4 in parallel.
Max continuous discharge: 200A (5.1 kW).

Nominal Voltage	25.6 V DC (8 cells in series)
Nominal Capacity	200 Ah (5.12 kWh)
Max Discharge Current	200 A continuous (400A peak)
Terminals	M8 Female Thread

Smart LiFePO4 25.6V 200Ah

Technical & Electrical Specifications

Terminal Pinouts & Hardware Connections

Official Product Manual & Wiring Guidelines

1. Safety Instructions

2. Specifications

Plan Your System with the Smart LiFePO4 25.6V 200Ah

Component Summary

Related 12V Calculators

Matching Equipment