← All Components Wire in Designer
Generic Power Sources & Batteries Vehicle Alternator

Vehicle Alternator 80A

Standard vehicle alternator rated at 80A (approximately 1,000W at 12.5V). Typical for smaller passenger vehicles. Connect via a DC-DC charger — do NOT wire directly to a lithium battery.

Voltage 12.0 V DC
Current 80 A

Technical & Electrical Specifications

Output Voltage
14.4 V DC
Max Current Rating
80 A
Isgeneric
True

Terminal Pinouts & Hardware Connections

Verify physical terminal sizes, stud threads (M6, M8, M10), and circuit polarity before crimping lugs or running wiring.

Hardware terminal connection details and stud sizes for Vehicle Alternator 80A
Terminal Label Polarity / Type Nominal Voltage Physical Hardware Location
B+
alt_pos
+ DC Positive 12.0V Standard Terminal Top Panel
B-
alt_neg
- DC Negative 12.0V Standard Terminal Top Panel
Installation Safety Standard: Always size circuit protection (ANL, MIDI, or MEGA fuses) to protect the cable run attached to these terminals against dead shorts and thermal overload, in compliance with AS/NZS 3001, AS/NZS 3004, and ABYC E-11 standards.

Plan Your System with the Vehicle Alternator 80A

Add this Generic component straight into our interactive canvas designer. Connect virtual cables, verify fuse ratings, run live appliance simulations, and ensure full standards compliance before you touch a drill or cut a cable.

Open in Visual Designer — Free & Instant
Advertisement