← All Components Wire in Designer
Victron Energy Chargers & Inverters Inverter Charger

MultiPlus-II 48/5000/70-50

48V 5000VA (4000W continuous) pure sine wave inverter with integrated 70A 48V battery charger and 50A automatic AC transfer switch. Built for high-power off-grid and 48V RV systems.

Voltage 48 V DC
Current 70 A
Power 5000 VA

Technical & Electrical Specifications

Nominal Voltage
48 V DC
Continuous Inverter Rating
5000 VA
Charging Output Current
70 A
AC Output Load
0 W
Shore Power Limit
50 A

Terminal Pinouts & Hardware Connections

Verify physical terminal sizes, stud threads (M6, M8, M10), and circuit polarity before crimping lugs or running wiring.

Hardware terminal connection details and stud sizes for MultiPlus-II 48/5000/70-50
Terminal Label Polarity / Type Nominal Voltage Physical Hardware Location
DC+
dc_pos
+ DC Positive 48V Standard Terminal Bottom Panel
DC-
dc_neg
- DC Negative 48V Standard Terminal Bottom Panel
AC IN
ac_in
~ AC Terminal 48V Standard Terminal Left Panel
AC OUT
ac_out
~ AC Terminal 48V Standard Terminal Right Panel
AC GND
ac_gnd
⏚ Chassis Ground 48V Standard Terminal Right Panel
VEB
ve_bus
Data 48V Standard Terminal Bottom Panel
Installation Safety Standard: Always size circuit protection (ANL, MIDI, or MEGA fuses) to protect the cable run attached to these terminals against dead shorts and thermal overload, in compliance with AS/NZS 3001, AS/NZS 3004, and ABYC E-11 standards.

Official Product Manual & Wiring Guidelines

Manufacturer technical instructions, safety precautions, and troubleshooting procedures.

Download PDF Manual

1. Safety Instructions

48V / 230V Dual High Voltage Hazard: 48V DC requires dedicated 58V/70V or Class-T fusing. 230V AC output requires RCD / Earth bonding per AS/NZS 3000 / 3001.
  • DC Fuse: 125A – 150A (58V MEGA or Class-T). Minimum DC cable: 35–50 mm² (draws only ~90A at full 4000W continuous).
  • Connect only to 48V nominal battery banks (38 – 66 V DC).

Plan Your System with the MultiPlus-II 48/5000/70-50

Add this Victron Energy component straight into our interactive canvas designer. Connect virtual cables, verify fuse ratings, run live appliance simulations, and ensure full standards compliance before you touch a drill or cut a cable.

Open in Visual Designer — Free & Instant
Advertisement