Technical & Electrical Specifications

Nominal Voltage

12 V DC

Output Voltage

15 V DC

Max Output Current

10 A

Operating Efficiency

92%

Terminal Pinouts & Hardware Connections

Verify physical terminal sizes, stud threads (M6, M8, M10), and circuit polarity before crimping lugs or running wiring.

Hardware terminal connection details and stud sizes for 12V→15V DC-DC Step-Up Converter (10A)
Terminal Label	Polarity / Type	Nominal Voltage	Physical Hardware	Location
IN+ in_pos	+ DC Positive	12V	Screw Terminal Clamp	Top Panel
IN- in_neg	- DC Negative	12V	Screw Terminal Clamp	Top Panel
OUT+ out_pos	+ DC Positive	15V	Screw Terminal Clamp	Bottom Panel
OUT- out_neg	- DC Negative	15V	Screw Terminal Clamp	Bottom Panel

Installation Safety Standard: Always size circuit protection (ANL, MIDI, or MEGA fuses) to protect the cable run attached to these terminals against dead shorts and thermal overload, in compliance with AS/NZS 3001, AS/NZS 3004, and ABYC E-11 standards.

Official Product Manual & Wiring Guidelines

Manufacturer technical instructions, safety precautions, and troubleshooting procedures.

1. Safety Instructions

Heat Dissipation: The converter casing will warm up under high load. Mount the unit on a non-flammable surface with adequate ventilation. Do not cover the cooling fins.

Input Voltage Range	9V - 16V DC
Output Voltage	15.0V DC (regulated)
Max Output Current	10 Amps (150 Watts)
Efficiency	92% typical

12V→15V DC-DC Step-Up Converter (10A)

Technical & Electrical Specifications

Terminal Pinouts & Hardware Connections

Official Product Manual & Wiring Guidelines

1. Safety Instructions

2. Specifications

3. Wiring Guidelines

Plan Your System with the 12V→15V DC-DC Step-Up Converter (10A)

Component Summary

Related 12V Calculators

Matching Equipment