Technical & Electrical Specifications

Nominal Voltage

12 V DC

Low Voltage Cut-off

9 V DC

Max Allowed Voltage

32 V DC

Continuous Current Draw

1.6 A

Default Duty Cycle

1

Estimated Daily Use

24

Critical

False

Terminal Pinouts & Hardware Connections

Verify physical terminal sizes, stud threads (M6, M8, M10), and circuit polarity before crimping lugs or running wiring.

Hardware terminal connection details and stud sizes for STEDI LED Rock Light Kit (4-Pack)
Terminal Label	Polarity / Type	Nominal Voltage	Physical Hardware	Location
+ pos	+ DC Positive	12V	Screw Terminal Clamp	Left Panel
- neg	- DC Negative	12V	Screw Terminal Clamp	Right Panel

Installation Safety Standard: Always size circuit protection (ANL, MIDI, or MEGA fuses) to protect the cable run attached to these terminals against dead shorts and thermal overload, in compliance with AS/NZS 3001, AS/NZS 3004, and ABYC E-11 standards.

Official Product Manual & Wiring Guidelines

Manufacturer technical instructions, safety precautions, and troubleshooting procedures.

Download PDF Manual

1. Installation Safety

Relay Installation: Always mount the relay in a dry spot and fuse the main power source within 30cm of the battery terminal.

Route wiring away from hot or moving vehicle components.
Ensure all unused plugs are sealed with waterproof caps.

Total Current Draw	1.6A @ 13.6V (~22W)
Relay Rating	40A 12V DC
Fuse Protection	10A inline blade fuse

STEDI LED Rock Light Kit (4-Pack)

Technical & Electrical Specifications

Terminal Pinouts & Hardware Connections

Official Product Manual & Wiring Guidelines

1. Installation Safety

2. Kit Specifications

Plan Your System with the STEDI LED Rock Light Kit (4-Pack)

Component Summary

Related 12V Calculators

Matching Equipment