Technical & Electrical Specifications

Nominal Voltage

12 V DC

Low Voltage Cut-off

9 V DC

Max Allowed Voltage

32 V DC

Continuous Current Draw

1.15 A

Default Duty Cycle

0.5

Estimated Daily Use

24

Critical

False

Terminal Pinouts & Hardware Connections

Verify physical terminal sizes, stud threads (M6, M8, M10), and circuit polarity before crimping lugs or running wiring.

Hardware terminal connection details and stud sizes for STEDI Cabin Light (7.8")
Terminal Label	Polarity / Type	Nominal Voltage	Physical Hardware	Location
+ pos	+ DC Positive	12V	Screw Terminal Clamp	Left Panel
- neg	- DC Negative	12V	Screw Terminal Clamp	Right Panel

Installation Safety Standard: Always size circuit protection (ANL, MIDI, or MEGA fuses) to protect the cable run attached to these terminals against dead shorts and thermal overload, in compliance with AS/NZS 3001, AS/NZS 3004, and ABYC E-11 standards.

Official Product Manual & Wiring Guidelines

Manufacturer technical instructions, safety precautions, and troubleshooting procedures.

Download PDF Manual

1. Touch Interface Controls

Tap the touch button to toggle between Amber, White, and Dual modes. Hold the touch button to dim the output smoothly.

Current Draw	1.15A @ 12V (12W)
Dimensions	197.8mm x 25.9mm x 40.6mm
IP Rating	IP68 Waterproof

STEDI Cabin Light (7.8")

Technical & Electrical Specifications

Terminal Pinouts & Hardware Connections

Official Product Manual & Wiring Guidelines

1. Touch Interface Controls

2. Specifications

Plan Your System with the STEDI Cabin Light (7.8")

Component Summary

Related 12V Calculators

Matching Equipment