← All Components Wire in Designer
STEDI Consumer Loads & Appliances 12V / 24V Lighting

STEDI Cabin Light (13.9")

STEDI 13.9" Micro Touch Dual Colour (Amber/White) LED cabin light. Touch-sensitive dimming. Draws 2.23A @ 12V.

Voltage 12 V DC
Current 2.23 A

Technical & Electrical Specifications

Nominal Voltage
12 V DC
Low Voltage Cut-off
9 V DC
Max Allowed Voltage
32 V DC
Continuous Current Draw
2.23 A
Default Duty Cycle
0.5
Estimated Daily Use
24
Critical
False

Terminal Pinouts & Hardware Connections

Verify physical terminal sizes, stud threads (M6, M8, M10), and circuit polarity before crimping lugs or running wiring.

Hardware terminal connection details and stud sizes for STEDI Cabin Light (13.9")
Terminal Label Polarity / Type Nominal Voltage Physical Hardware Location
+
pos
+ DC Positive 12V Screw Terminal Clamp Left Panel
-
neg
- DC Negative 12V Screw Terminal Clamp Right Panel
Installation Safety Standard: Always size circuit protection (ANL, MIDI, or MEGA fuses) to protect the cable run attached to these terminals against dead shorts and thermal overload, in compliance with AS/NZS 3001, AS/NZS 3004, and ABYC E-11 standards.

Official Product Manual & Wiring Guidelines

Manufacturer technical instructions, safety precautions, and troubleshooting procedures.

Download PDF Manual

1. Technical Specs

Current Draw2.23A @ 12V (24W)
Dimensions353.0mm x 25.0mm x 40.6mm
Effective Lumens2,623 lm

Plan Your System with the STEDI Cabin Light (13.9")

Add this STEDI component straight into our interactive canvas designer. Connect virtual cables, verify fuse ratings, run live appliance simulations, and ensure full standards compliance before you touch a drill or cut a cable.

Open in Visual Designer — Free & Instant
Advertisement