← All Components Wire in Designer
PowerPaul Australia Power Sources & Batteries Lithium LiFePO4 Battery

Cabin 25.6V 160Ah

24V nominal (25.6V) lithium battery module for 24V marine or cabin systems. Features 250A BMS with 5A active balancer. Designed & Built in Australia. Series connection is not allowed. Parallel connection up to 4 units allowed.

Voltage 25.6 V DC
Current 250 A
Capacity 160 Ah

Technical & Electrical Specifications

Nominal Voltage
25.6 V DC
Battery Capacity
160 Ah
Max Continuous Discharge
250 A
Initial State of Charge
100

Terminal Pinouts & Hardware Connections

Verify physical terminal sizes, stud threads (M6, M8, M10), and circuit polarity before crimping lugs or running wiring.

Hardware terminal connection details and stud sizes for Cabin 25.6V 160Ah
Terminal Label Polarity / Type Nominal Voltage Physical Hardware Location
M8 Pos
pos
+ DC Positive 25.6V Standard Terminal Left Panel
M8 Neg
neg
- DC Negative 25.6V Standard Terminal Right Panel
Installation Safety Standard: Always size circuit protection (ANL, MIDI, or MEGA fuses) to protect the cable run attached to these terminals against dead shorts and thermal overload, in compliance with AS/NZS 3001, AS/NZS 3004, and ABYC E-11 standards.

Plan Your System with the Cabin 25.6V 160Ah

Add this PowerPaul Australia component straight into our interactive canvas designer. Connect virtual cables, verify fuse ratings, run live appliance simulations, and ensure full standards compliance before you touch a drill or cut a cable.

Open in Visual Designer — Free & Instant
Advertisement