← All Components Wire in Designer
Solar PV Distribution & Protection Battery Switch

BOB7Z-63 Solar DC Disconnect Switch

DC Miniature Circuit Breaker and 50A Isolator for Solar PV systems. Waterproof IP65 enclosure with overvoltage, overload and short circuit protection.

Voltage 12.0 V DC
Current 50 A

Technical & Electrical Specifications

Max Current Rating
50 A
Maxvoltagev
1000
State
ON

Terminal Pinouts & Hardware Connections

Verify physical terminal sizes, stud threads (M6, M8, M10), and circuit polarity before crimping lugs or running wiring.

Hardware terminal connection details and stud sizes for BOB7Z-63 Solar DC Disconnect Switch
Terminal Label Polarity / Type Nominal Voltage Physical Hardware Location
PV+ IN
pv_pos_in
+ DC Positive 12.0V Standard Terminal Left Panel
PV- IN
pv_neg_in
- DC Negative 12.0V Standard Terminal Left Panel
PV+ OUT
pv_pos_out
+ DC Positive 12.0V Standard Terminal Right Panel
PV- OUT
pv_neg_out
- DC Negative 12.0V Standard Terminal Right Panel
Installation Safety Standard: Always size circuit protection (ANL, MIDI, or MEGA fuses) to protect the cable run attached to these terminals against dead shorts and thermal overload, in compliance with AS/NZS 3001, AS/NZS 3004, and ABYC E-11 standards.

Plan Your System with the BOB7Z-63 Solar DC Disconnect Switch

Add this Solar PV component straight into our interactive canvas designer. Connect virtual cables, verify fuse ratings, run live appliance simulations, and ensure full standards compliance before you touch a drill or cut a cable.

Open in Visual Designer — Free & Instant
Advertisement