← All Components Wire in Designer
MoTeC Distribution & Protection Power Distribution Module (PDM)

MoTeC PDM15

15-channel solid-state PDM. 8×20A + 7×8A outputs. 16 switch inputs, 200 logic operations, CAN bus diagnostics. Programmable in 1A steps. Replaces all relays and fuses. ~$1,958 AUD.

Voltage 12.0 V DC

Technical & Electrical Specifications

Total PDM Rating
220 A
Max Current per Channel
20 A
Switched Channels
15 Outputs

Terminal Pinouts & Hardware Connections

Verify physical terminal sizes, stud threads (M6, M8, M10), and circuit polarity before crimping lugs or running wiring.

Hardware terminal connection details and stud sizes for MoTeC PDM15
Terminal Label Polarity / Type Nominal Voltage Physical Hardware Location
BAT+
main_pos
+ DC Positive 12.0V Standard Terminal Left Panel
BAT-
main_neg
- DC Negative 12.0V Standard Terminal Left Panel
CH1
ch1
+ DC Positive 12.0V Standard Terminal Right Panel
CH2
ch2
+ DC Positive 12.0V Standard Terminal Right Panel
CH3
ch3
+ DC Positive 12.0V Standard Terminal Right Panel
CH4
ch4
+ DC Positive 12.0V Standard Terminal Right Panel
CH5
ch5
+ DC Positive 12.0V Standard Terminal Right Panel
CH6
ch6
+ DC Positive 12.0V Standard Terminal Right Panel
CH7
ch7
+ DC Positive 12.0V Standard Terminal Right Panel
CH8
ch8
+ DC Positive 12.0V Standard Terminal Right Panel
CH9
ch9
+ DC Positive 12.0V Standard Terminal Right Panel
CH10
ch10
+ DC Positive 12.0V Standard Terminal Right Panel
CH11
ch11
+ DC Positive 12.0V Standard Terminal Right Panel
CH12
ch12
+ DC Positive 12.0V Standard Terminal Right Panel
CH13
ch13
+ DC Positive 12.0V Standard Terminal Right Panel
CH14
ch14
+ DC Positive 12.0V Standard Terminal Right Panel
CH15
ch15
+ DC Positive 12.0V Standard Terminal Right Panel
GND
gnd_bus
- DC Negative 12.0V Standard Terminal Bottom Panel
Installation Safety Standard: Always size circuit protection (ANL, MIDI, or MEGA fuses) to protect the cable run attached to these terminals against dead shorts and thermal overload, in compliance with AS/NZS 3001, AS/NZS 3004, and ABYC E-11 standards.

Plan Your System with the MoTeC PDM15

Add this MoTeC component straight into our interactive canvas designer. Connect virtual cables, verify fuse ratings, run live appliance simulations, and ensure full standards compliance before you touch a drill or cut a cable.

Open in Visual Designer — Free & Instant
Advertisement