Verify physical terminal sizes, stud threads (M6, M8, M10), and circuit polarity before crimping lugs or running wiring.
Hardware terminal connection details and stud sizes for Portable Induction Cooktop 2000W
Terminal Label
Polarity / Type
Nominal Voltage
Physical Hardware
Location
AC IN
ac_in
~ AC Terminal
240V
Screw Terminal (AC)
Bottom Panel
Installation Safety Standard: Always size circuit protection (ANL, MIDI, or MEGA fuses) to protect the cable run attached to these terminals against dead shorts and thermal overload, in compliance with AS/NZS 3001, AS/NZS 3004, and ABYC E-11 standards.
Official Product Manual & Wiring Guidelines
Manufacturer technical instructions, safety precautions, and troubleshooting procedures.
INVERTER SIZING: Operating this 2000W cooktop requires a pure sine wave inverter rated for at least 2000W continuous (2500W recommended). Make sure your battery bank can deliver ~180A-200A DC continuously.
Plan Your System with the Portable Induction Cooktop 2000W
Add this Generic component straight into our interactive canvas designer.
Connect virtual cables, verify fuse ratings, run live appliance simulations, and ensure full standards compliance before you touch a drill or cut a cable.
